Which Cable Goes First When Jumping a Car?

Which Cable Goes First When Jumping A Car? - Lokithorshop

which cable goes first when jumping a car? When your car suddenly doesn't start, and for some drivers, it means an automatic call to your roadside assistance company. But, if you have the right equipment and a little bit of knowledge, you can fix this problem all by yourself—jumping your engine and getting back on the road in no time flat.

According to ADAC breakdown statistics, up to 40% of all breakdowns are caused by poorly maintained batteries. If the battery capacity falls below a critical level, it cannot supply the car’s electrical components with sufficient power. Often as a last resort jump starting with the aid of a jumper cable can get the vehicle started.

jump starter clamps 

How to hook up jumper cables and how to jump-start a car? when jumping a car which cable goes first?

Once the two vehicles are in place, turn off both and open the hoods.

1. Attach one red jumper cable clamp to the positive terminal on the dead battery.

2. Attach the other end of the same cable, the second red jumper cable clamp, to the positive terminal on the working (live) car battery.

3. Attach one black jumper cable clamp to the negative terminal of the working (live) car’s battery.

4. Attach the other end of that cable, the second black jumper cable clamp, to an unpainted piece of stationary metal on the car with the dead battery.

Do not attach this clamp to the negative terminal on the dead car’s battery.

5. Start the working vehicle and let it run for a few seconds.

Start the working vehicle. Wait a minute or so. Depending on the age of the battery and how long since it died, you may need to let the car run for a minute or two to get the jump to work.

6. Start the dead vehicle. It should turn on.

Try starting the dead car. If the car doesn't start, allow the working vehicle to charge the battery for an additional minute or two before attempting again.

when jumping a car which cable goes first

Once the dead car is running, you may disconnect the jumper cables, starting with the black, negative cable clamps. Do not let the clamps touch each other while any part of the cables is still attached to a car.

Congrats, you’ve jump-started your vehicle! Be sure to thank the good samaritan, friend, family member, or neighbor who helped you out by letting you use their live battery!

If, however, your jump start doesn’t work, and you find yourself turning the key in the ignition over and over again without the engine turning on, you may have a larger problem at hand. In this case, it’s best to have a mechanic look at the car or to have it towed somewhere it can be serviced.

How Do You Jump A Car Battery Without A Second Car?

Lokithor JA series

Buy a top rated portable jump starter and put it in the car as a spare, A good alternative to conventional jumper cables is the use of a most powerful portable jump starter. Jump starter for gasoline engines are portable lithium-ion batteries with an integrated jumper cable. The connection of the cable clamps is identical to the connection of a jumper cable.

You can purchase a 12v ultrasafe lithium jump starter place in your car, according to the displacement of the car you are using. When encountering this kind of emergency, you don't need to wait for road rescue, you can start your car in an emergency. After your car starts, you can recharge your battery, or replace it with a brand new battery.

Contact Us

For further product information, please visit:

Recommended reading: How Many Voltages Should A Car Battery Have?

    Reading next

    How to Clean Car Battery Corrosion - 6Easy Steps - Lokithorshop
    What Color is Positive on a Car Battery?

    Leave a comment

    All comments are moderated before being published.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.